Winterizing your pool lines is an important part of closing up your pool for the season. Blowing out the pool lines with an air compressor is an effective way to ensure no water remains in your pipes, preventing damage and saving you time and money in the long run. Read on to learn how to blow out your pool lines the right way.
Steps to Blowing Out Pool Lines
Step 1: Preparing Your Pool Lines
The first step to blowing out pool lines is to make sure they are properly prepared. You will need to backwash your filter and clean out the skimmer basket, as well as any other filters you have installed. This will help to ensure that no dirt, debris, or other contaminants are left behind in the pipes when you blow them out.
Step 2: Attaching the Air Compressor Hose
Once your pool lines are prepped, you can attach the air compressor hose to the skimmer basket. Make sure the hose fits snugly in the skimmer basket so that air can flow freely. If you have multiple skimmers, you may need to connect a hose to each one.
Step 3: Opening the Pool Line Valves
Next, you will need to open all of the pool line valves to allow the air to flow through the pipes. This will help to ensure that all of the water is removed from the pipes. If your pool has a dedicated pool line for the filter, make sure to open that valve as well so that air can flow through it.
Step 4: Turning on the Air Compressor
Once all of the valves are open, you can turn on the air compressor. Make sure the pressure is set to the correct level, as too much pressure can damage the pipes. Allow the compressor to run for several minutes until all of the water has been removed from the pipes.
Step 5: Closing the Pool Line Valves
Once all of the water has been removed from the pipes, you can turn off the air compressor and close the pool line valves. This will help to prevent water from entering the pipes, and will also help to protect them from any potential damage.
Step 6: Storing the Air Compressor
Once the pool lines have been adequately blown out, you can store the air compressor until you are ready to use it again. Be sure to turn off the power before storing the compressor, and make sure to keep it in a dry, safe place.
People Also Ask
How Long Should I Run the Air Compressor for Pool Lines?
The amount of time you need to run the air compressor for your pool lines depends on the size of your pool, but generally you should run it for at least five minutes. This will ensure that all of the water has been removed from the pipes.
Do I Need to Use an Air Compressor to Blow Out Pool Lines?
Yes, an air compressor is the most effective way to blow out pool lines. This will help to ensure that all of the water has been removed from the pipes, preventing any potential damage.
Do I Need to Backwash My Filter Before Blowing Out Pool Lines?
Yes, it is important to backwash your filter before blowing out the pool lines. This will help to ensure that no dirt, debris, or other contaminants are left behind in the pipes when you blow them out.
What is the Best Way to Store an Air Compressor?
The best way to store an air compressor is in a dry, safe place. Make sure to turn off the power before storing the compressor, and make sure it is protected from the elements.
Blowing out your pool lines with an air compressor is an important part of winterizing your pool for the season. It’s a relatively simple process that can save you time and money in the long run. Follow the steps outlined above and you’ll be sure to have a properly blown-out pool this winter.
How to Blow Out Your Swimming Pool Lines - My Pool Guy
How to Blow Out Your Pool Lines for the Winter—In Ten Easy Steps
How to Blow Out Pool Lines
